Gme TX665 Manuel d'utilisateur télécharger pdf (Page 10)

PAGE 10 INSTRUCTION MA NUAL T X665

3. Slide the battery cover downwards with your thumb then lift the cover clear to

remove it.

4. Unplug the connector at the top of the battery compartment and remove the battery.

5. Place the new battery in the battery compartment.

6. Plug the connector into the socket ensuring the RED (positive) wire is on the right

(the connector should only ﬁt one way).

7. Reinstall the battery cover ensuring the wires do not become jammed in the cover.

BATTERY USAGE

The time taken to discharge the battery pack will depend on how you use the radio.

The battery pack supplied is powerful enough for up to 17 hours of use under average

conditions using low power.

BATTERY LOW ALERT

When the battery icon blinks on the radio’s display, the battery level is low and the

battery pack should be recharged.

CONSERVING BATTERY POWER

The radio has built-in power saving features to help you get the maximum amount of

time between charges from your Li-ion battery pack. If you need to operate your radio

in a situation where you require maximum battery life (e.g. a remote site where there

is no convenient recharging facility nearby) the following hints can greatly reduce the

amount of power drawn from the battery pack.

STANDBY MODE

The radio will automatically enter the ‘Standby’ mode when it is inactive (i.e. not

transmitting or receiving signals).

While in Standby mode it will still check for incoming signals but it will draw

considerably less power from the battery pack. As soon as a signal is heard or the

keys are pressed the radio will ‘wake up’ again. This Standby mode is automatic and

by itself can extend the battery life by many hours.

Slide battery

cover to

remove

Wires

Battery

Connector

Red wire

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Pas de commentaire

Gme TX665 Manuel d'utilisateur Page 10