Gme TX665 Manuel d'utilisateur télécharger pdf (Page 16)

PAGE 16 INSTRUCTION MA NUAL T X665

DUPLEX MODE SELECTION

The Duplex option only appears in the Menu if a repeater channel (1 – 8 or 41 – 48)

is selected.

To enable duplex on a repeater channel

1. Hold the MENU key for 2 seconds. The channel number will ﬂash.

2. Press the

or keys to select the required repeater channel.

3. Brieﬂy press the MENU key to advance to the Duplex option. The

icon will ﬂash.

4. Press the

or keys to select ‘on’ (duplex enabled) or ‘oF’ (duplex disabled) on

the display.

5. Press the PTT to store your setting and exit the Menu.

Whenever Duplex is enabled on a repeater channel, the

icon will be displayed on

that channel.

CTCSS AND DCS CODE SELECTION

The radio is ﬁtted with both CTCSS and DCS systems. There are 50 CTCSS tones and

104 DCS codes. The DCS codes and the CTCSS tones are accessed through the same

menu (see table below). When CTCSS tones are being selected ‘ct’ is displayed.

To access DCS codes scroll past CTCSS tone 50 until ‘dt’ is displayed.

To Select a CTCSS or DCS Code

1. Hold the MENU key for 2 seconds. The channel number will ﬂash.

2. Press the MENU key repeatedly until 'ct’ (for CTCSS) or ‘dt’ (for DCS) is displayed.

3. Press the

or keys to select the required tone/code.

4. To select CTCSS tones 01 to 50 press the

or keys while ‘ct’ is displayed.

When a CTCSS code is selected the icon is displayed.

5. To select DCS codes, hold the

key to scroll past CTCSS tone 50 until ‘dt’ is

displayed. Now use the or keys to select the required DCS code 001 to 104.

When a DCS code is selected the icon is displayed.

6. To return to CTCSS tones hold the

or keys until ‘ct’ is displayed again.

7. To turn CTCSS/DCS tones off, hold the

or keys to step to the end of the code

list until ‘oF’ is displayed.

8. Press the PTT to conﬁrm and store your selection. The

(CTCSS) or icon

remains on the display to conﬁrm the code system you have selected.

To enable Silent mode on a channel

1. Select the required channel.

2. Press and hold the SQL key for about 2 seconds. The selected code number will be

displayed on that channel.

3. The selected channel will now remain silent unless a signal is received containing

the chosen code.

OFF

CT (CTCSS) DT (DCS)

01 50 001 104

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Commentaires sur ces manuels

Pas de commentaire

Gme TX665 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Talkie-walkie Gme TX665